Need some help with electrical diagnostics

Sorry for typos, I'm on mobileI have a 2007 honda shadow aero I'm working on. Currently I'm having a bit if trouble with the turn signalsI'm not sure about on other bikes, but on mine, the signals are always lit, and flash off when you signal, which I quite like. However, currently the power to the right rear seems to somehow be inverted.Currently I'm having a problem where three signals are acting at expected, but the right rear is behaving in a "traditional" manner - normally off and flashing on.What am I missing here? I dont think it's the flasher relay, as I believe that this bike is setup to run from the switch, to the relay and back to the switch for distribution. All of the signals are on one fuse, so it's not that. I have continuity through the wiring between the switch and the connector by the signal.If I swap the signal to the connector for the left side, it works as expected, so it's not the signal itself.The front working normally is what's throwing me off. Is it the switch maybe? Maybe??I'm not 100% clear on if the front and rear run off the same circuit, as theres three wires running to the front signal (why I dont know) but only two to the rear.I can upload a picture of the wiring diagram if that would help. I appreciate the insight as I'm really starting to scratch my head hereCheers via /r/motorcycles https://www.reddit.com/r/motorcycles/comments/giqnuu/need_some_help_with_electrical_diagnostics/?utm_source=ifttt