Clutch won't disengage - Fixed - Bled old clutch fluid

I hope that this info will help someone :)I was having some clutch problems on my recently purchased 1985 Honda nighthawk CB650SC where the clutch wouldn't disengage and I thought I was going to have to bring it in to the mechanicIt didn't slip at all but wouldn't let me disengage to switch gearsthe owners manual mentioned that it needed to be bled https://imgur.com/a/jovAOk3I followed this youtube video https://www.youtube.com/watch?v=2PXTsOukXuUThe clutch master cylinder it was stuck so I ordered this craftsman impact screwdriver from amazon which worked like a charm https://www.amazon.com/CRAFTSMAN-Impact-Driver-8-Inch-CMMT14104/dp/B07R96M9VW/When I finally opened it it looked pretty disgustingthe video was vague on what tubing to get so I bought the cheapest plastic 1/4 inch interior diameter tubing I could find at the hardware store & I also bought some dot4 brake fluid - a large bottleput everything back together and the clutch works better than when I bought the bike via /r/motorcycles https://www.reddit.com/r/motorcycles/comments/cy7cg1/clutch_wont_disengage_fixed_bled_old_clutch_fluid/?utm_source=ifttt